Muffler, Removing And Installing: Removing

WARNING: This page is about a different car, the 2019 Audi A4 allroad, 2018 Audi A4 allroad, 2017 Audi A4 allroad, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

-- Equipped on some models: remove the left and right diagonal brace. Refer to OVERVIEW - UNDERBODY BRACING .

-- Loosen the clamping sleeve -arrows- and push toward the rear.

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of damaging the coupling due to improper handling.

- Coupling must not be bent more than 10°.

- Do not load the coupling on the cable.

-- Slightly lower the front muffler and remove the clamping sleeve.

-- Tie up the front muffler.

FWD Vehicle:

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of accident due to the heavy weight of the muffler.

- A second technician is required for the following work steps.

-- Disengage the mounting -4- from the exhaust system.

-- Remove the bolts -1 and 3- and remove the muffler -2-.

AWD Vehicle:

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of accident due to the heavy weight of the muffler.

- A second technician is required for the following work steps.

-- Disengage the mounting -2 and 4- from the exhaust system.

-- Remove the bolts -3- and remove the muffler -1-.