Exhaust Pipes/Mufflers, Disconnecting
WARNING: This page is about a different car, the 2019 Audi A4 allroad, 2018 Audi A4 allroad, 2017 Audi A4 allroad, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Chain Pipe Cutter: VAS6254
- A separating point has been provided in the connecting pipe for individual replacement of the center or rear muffler.
- The separating point is marked by an indentation around the circumference of the exhaust pipe.
Procedure
-- Separate the exhaust pipes at a right angle at the notch -arrow- using a : VAS6254 .
-- When installing, position the clamping sleeves -arrows- on the center of the separation cut.
-- Install the clamping sleeves. Refer to Figure.
-- Install the exhaust system without tension. Refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .