Engine Temperature Control Actuator -N493-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2020 Audi A4 allroad, 2019 Audi A4 allroad, 2018 Audi A4 allroad, 2017 Audi A4 allroad, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

Fig 1: Coolant Expansion Tank.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lift the clamps -arrows-, remove and free up the coolant hoses.

-- Disconnect the connector -1- for the Engine Coolant Level Warning Switch -F66-.

-- Remove the bolt -2- and remove the coolant expansion tank -3-.

All additional procedures are described. Refer to Engine Temperature Control Actuator -N493-, REMOVING AND INSTALLING .