Coolant Pump, Removing And Installing: Removing

WARNING: This page is about a different car, the 2020 Audi A4 allroad, 2019 Audi A4 allroad, 2018 Audi A4 allroad, 2017 Audi A4 allroad, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Disconnect the connectors -2 to 5-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -1- and move the bracket -2- with the engine wiring harness to the side.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Refer to COOLANT PUMP, REMOVING AND INSTALLING .