Coolant Pump Toothed Belt, Removing And Installing: Removing

WARNING: This page is about a different car, the 2020 Audi A4 allroad, 2019 Audi A4 allroad, 2018 Audi A4 allroad, 2017 Audi A4 allroad, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Remove the bolt -1- and move the bracket -2- with the engine wiring harness to the side.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Lift the clamps -1 and 2- and remove the coolant hoses and push them to the side.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .