LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Cooling System [CYMC,CYRB,CYRC,CWPB,DDWA,DKNA,DKWA,DLHB,DDWB]) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Coolant Pump Toothed Belt, Removing And Installing >> Installing

Coolant Pump Toothed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2020 Audi A4 allroad, 2019 Audi A4 allroad, 2018 Audi A4 allroad, 2017 Audi A4 allroad, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Additional procedures:

-- Connect the coolant hose to the connector coupling. Refer to Figure.

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals