Transmission Coolant Pipes, Removing And Installing: Installing
WARNING: This page is about a different car, the 2020 Audi A4 allroad, 2019 Audi A4 allroad, 2018 Audi A4 allroad, 2017 Audi A4 allroad, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
- Used coolant cannot be used again.
-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .