Exhaust Pipes/Mufflers, Disconnecting: Procedure

WARNING: This page is about a different car, the 2020 Audi A4, 2019 Audi A4, 2018 Audi A4, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

-- Separate the exhaust pipes at a right angle at the notch -arrow- using a :VAS6254 .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- When installing, position the clamping sleeves -arrows- on the center of the separation cut.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the clamping sleeves. Refer to Figure.

-- Install the exhaust system without tension. Refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .