LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Ignition System (Servicing [CVKB,DBPA,CWNA,CVLA,DEMA,DHDA,DKUA]) >> 28 Ignition System >> Ignition System >> Camshaft Position Sensor, Removing And Installing >> Camshaft Position Sensor 3 -G300- , Removing And Installing >> Installing

Installing

WARNING: This page is about a different car, the 2020 Audi A4, 2019 Audi A4, 2018 Audi A4, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

Replace the O-ring if damaged after removing.

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals