Valve Stem Seals, Removing And Installing, Cylinder Head Installed: Notes
Special Tools And Workshop Equipment Required
- Spark Plug Removal Tool:3122B
- Puller - Valve Seal:3364
- Seal Installer - Valve Stem:3365 or (depending on the version/manufacturer of the valve stem seal) Fitting Tool:T40376/1
- Valve Keeper Tool Kit:VAS5161A with the Valve Cotter Tool Kit - Guide Plate 19c:VAS5161/19C
- Valve Cotter Tool Kit - Adapter:T40012
- Mounting Sleeve. Refer to Parts information
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Seal - Valve stem