Turbocharger, Removing And Installing, 3.0L Engine: Removing
-- Remove the engine cover and heat shield. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Remove the upper air duct pipe. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING .
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Remove the bolts -arrows- and then remove the air duct pipe -1- from the turbocharger.
-- Remove the bolt -3- and the line -2- for the EVAP system and move to the side.
All additional procedures are described. Refer to TURBOCHARGER, REMOVING AND INSTALLING .