LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Controls, Housing (7-Speed Dual Clutch Transmission 0CJ, 0CK, 0CL, 0DN, 0DP)) >> 34 Controls, Housing >> MECHATRONIC >> MECHATRONIC, Removing And Installing >> Removing

MECHATRONIC, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

The system is under pressure.

  • Deactivate the ATF pump and drain the hydraulic pressure reservoir before removing the transmission fluid pan!

-- Using the Vehicle Diagnostic Tester in the Transmission Control Module -J217- empty the ATF pressure reservoir and disable the Transmission Fluid Auxiliary Hydraulic Pump -V552-. Refer to ATF PUMP, DEACTIVATING AND DRAINING THE HYDRAULIC PUMP RESERVOIR .

-- Remove the subframe crossbrace. Refer to SUBFRAME CROSSBRACE, REMOVING AND INSTALLING .

-- Remove the transmission fluid pan. Refer to TRANSMISSION FLUID PAN, REMOVING AND INSTALLING .

Refer to OVERVIEW - MECHATRONIC for all further work on the Mechatronic.

scientia non olet · About LEMON Manuals