Refer to Calibrating the Auxillary Hydraulic pump.
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the Vehicle Diagnostic Tester.
- Network plan or control module list
- 02 - Transmission Electronics, Guided Functions
- 02 Basic Setting
- Auxiliary Hydraulic Pump, Calibrating
- Start the selected program and follow the instructions in the display of the Vehicle Diagnostic Tester.
- Checking the ATF level. Refer to ATF LEVEL, CHECKING .