Solenoid Valves And Pressure Regulating Valves In Valve Body, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.

Check before the repair, if the necessary replacement parts are available. Refer to the Electronics Parts Information.

NOTE:

Do not remove the clutch piston valve -arrow- it remains in the valve body.

Courtesy of AUDI OF AMERICA, LLC

Due to the exact positioning of components, reinstallation is not possible, since the valve body would be damaged.

Remove the Mechatronic. Refer to MECHATRONIC, REMOVING AND INSTALLING .
Remove the Transmission Control Module -J217-. Refer to TRANSMISSION CONTROL MODULE -J217-, REMOVING AND INSTALLING .
Courtesy of AUDI OF AMERICA, LLC

Remove bolts -arrows- and remove the contact element.

Courtesy of AUDI OF AMERICA, LLC

Hold the Solenoid Valve 5 -N92- -1- when removing the mounting rail.
The clutch cooling valve -2- and the spring -3- must remain in the valve body.

Courtesy of AUDI OF AMERICA, LLC

Remove the bolts -arrows- and remove the mounting rail.
Courtesy of AUDI OF AMERICA, LLC

Remove the valves if necessary carefully pry out as shown in direction of -arrows-.