Right Flange Shaft, Removing And Installing: Installing

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal and note the following:

NOTE:

Replace the circlip after removing.

-- Insert the circlip -1- with the :VAS5503A .

-- Check the right flange shaft seal for damage and replace if necessary.

-- Fill the space between the sealing/dust lip halfway with Sealing Grease :G 052 128 A1 .

-- Insert the right flange shaft.

-- Fill the transmission fluid and check the fluid level. Refer to TRANSMISSION FLUID, DRAINING AND FILLING .