Brake Rotor, Removing And Installing, Ceramic Brakes: Removing

-- Remove the brake caliper. Refer to BRAKE CALIPER, REMOVING AND INSTALLING, CERAMIC BRAKES .

-- Remove the bolt -1-.

Fig 1: Identifying Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the brake rotor by hand; do not use a tool.

TIP: 

If the brake rotor is seized, do the following:

-- Install two M8 bolts -arrows- all the way into the threaded holes of the brake rotor.

-- Tighten the bolts ¹ /₂ turn farther alternating from side to side to loosen the brake rotor from the wheel hub.