Rear Brake Carrier, Removing And Installing: Installing
Install in reverse order of removal and Note The Following:
NOTE:
Only use mineral spirits to clean the brake carrier.
WARNING:
Health Risk.
- Do not blow out brake system with compressed air.
-- Insert the brake carrier -1- and tighten.
Use new bolts -arrows-.
-- Install the brake pads. Refer to REAR BRAKE PADS, REMOVING AND INSTALLING .
WARNING:
Risk Of Accident!
- With the vehicle stationary, firmly press the brake pedal several times so that the brake pads in the operating condition properly sit in their respective position.
- Make sure the brakes are working correctly before driving the vehicle for the first time.