Turbocharger, Removing And Installing: Notes

Special tools and workshop equipment required 

• Engine Bung Set:VAS6122 
• Hose Clip Pliers:VAS6362 

If Mechanical Damage (for Example a Destroyed Compression Wheel) Is Found on the Turbocharger, Just Replacing the Turbocharger Is Not Enough. To Avoid Subsequent Damage Later, Perform the Following Steps:

• Check the air filter housing, air filter element and air duct hoses for contamination.
• Check the entire charge air circuit and charge air cooler for foreign objects.
• If there are foreign objects in the charge air system, clean the charge air circuit and replace the charge air cooler if necessary.