Steering Angle Sensor -G85- BASIC SETTING

Special tools and workshop equipment required 

• Vehicle Diagnostic Tester
• Steering Wheel Scales: VAS 6458A 
  Fig 1: Identifying Steering Wheel Scales

  Courtesy of AUDI OF AMERICA, LLC

Procedure 

Select this basic setting for the following operations:

• Settings to the suspension were changed.
• The Steering Column Electronics Control Module -J527- was replaced.
• The steering column was replaced.

-- After performing the respective procedures, select the "Steering Angle Sensor - G85" program. Refer to DIAGNOSTIC ENTRIES .

-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.