Rear Seat Belt Guide, Removing And Installing
Special tools and workshop equipment required
- Pry Lever: 80-200
- Trim Removal Wedge: 3409
Second Row Belt in Center, Removing
-- Release the tabs with a screwdriver -arrow A-.
-- At the same time, unclip the seat belt guide -1- upward -B and C arrows- using the : 3409 .
-- Open the gap on the belt guide and guide the seat belt webbing out.
Third Row Belt, Removing
-- North American version: remove the third row rear belt end fitting. Refer to THIRD ROW REAR BELT END FITTING, REMOVING AND INSTALLING .
-- Remove the seat belt guide -1- from the D-pillar trim panel -arrow- using the : 80-200 .
-- Disengage the seat belt guide at the D-pillar trim panel, guide the seat belt webbing out and remove.
Installing
Further installation is the reverse order of removal.
Installation instructions: tightening specifications, replacing body parts. Refer to OVERVIEW - REAR CENTER THREE-POINT SEAT BELT and OVERVIEW - THIRD ROW THREE-POINT SEAT BELT .