Tank Switch-Off Valve -N288-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different variant/trim than selected.
-- Observe the safety instructions. Refer to SAFETY PRECAUTIONS .
-- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the right rear wheel housing liner. Refer to REAR WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Remove the nut and bolts -arrows-.
-- Release and disconnect the connector for the wire -2-.
-- Disconnect the bleeder lines -1 and 3-. Disconnect the connector couplings. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
-- Remove the Tank Switch-Off Valve -N288- for the fuel system.