Fuel Level Sensor -G-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different variant/trim than selected.
-- Pay attention to all safety precautions. Refer to SAFETY PRECAUTIONS .
-- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .
-- Free up the wire for the Fuel Level Sensor -G- on the baffle housing.
-- Reach through the fuel tank opening, release the catch -1- in direction of -arrow A- and at the same time, remove the bracket -2- with the Fuel Level Sensor -G- from the mount on the baffle housing in direction of -arrow B-.
-- Carefully remove the Fuel Level Sensor -G- from the fuel tank opening.
NOTE:
Be careful not to bend the floater arm on the fuel level sensor when removing.