Fuel Level Sensor -G-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal and note the following:
NOTE:
Be careful not to bend the floater arm on the fuel level sensor when inserting.
-- Carefully guide the Fuel Level Sensor -G- through the opening in the fuel tank.
-- Insert the Fuel Level Sensor -G- into the mount on the baffle housing and push downward until it engages.
-- Engage the wire -1- to the baffle housing and route -arrows- as shown.
-- Install the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .