Ignition Coils, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Depending on the model preliminary work may be required. Refer to IGNITION COILS, REMOVING AND INSTALLING .

-- Insert the Puller :T10530 into the ignition coil opening -1-.

Fig 1: Identifying Puller T10530

Courtesy of AUDI OF AMERICA, LLC

-- Turn the knurled nut -2- clockwise -arrow- until the puller is clamped.

-- Using the Puller :T10530 , remove the ignition coils carefully upright in direction of -arrow-.

Fig 2: Identifying Puller T10530

Courtesy of AUDI OF AMERICA, LLC