Left Transmission Mount, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the left front muffler. Refer to FRONT MUFFLER, REMOVING AND INSTALLING .

-- Remove the subframe crossbrace. Refer to SUBFRAME CROSSBRACE, REMOVING AND INSTALLING .

-- Remove the left upper subframe shield. Refer to SUBFRAME SHIELD, REMOVING AND INSTALLING .

-- Disconnect the connector -2-.

Fig 1: Transmission Mount Valve Component Location

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Open the clip -2- and free up the coolant hose.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- If installed, remove the heat shield via the transmission support.

-- Remove the transmission support -3- and the transmission mount -1-.

-- Pry out the transmission mount -1- from the mount for the transmission mount.