Overview - Engine Mount
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
- Subframe
- Bolt
- 90 Nm + 90°
- Replace after removing
- Assembly Mount Sensor
- Assembly Mount Sensor 1 -G748-, right
- Assembly Mount Sensor 2 -G749- left
- Removing and Installing. Refer to ASSEMBLY MOUNT SENSOR, REMOVING AND INSTALLING .
- Bolt
- 10 Nm
- Bolt
- 55 Nm
- Engine Support
- Removing and Installing. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .
- Bolt
- 50 Nm + 90°
- Replace after removing
- Engine Mount
- With
- Left Electrohydraulic Engine Mount Solenoid Valve -N144- /Assembly Mount Actuator 2 -N514- left
- Right Electrohydraulic Engine Mount Solenoid Valve -N145- /Assembly Mount Actuator 1 -N513- right
- Removing and Installing. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
- With
- Bolt
- 30 Nm