Vehicle Diagnostic Tester, Connecting
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Risk of injury due to unintended engine start on high-voltage vehicles!
- Pay attention to the high-voltage system warning messages:
- For procedures where the ignition must be switched off, refer to PROCEDURES THAT NEED IGNITION SWITCHED ON .
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
- Diagnostic Interface: VAS 6154A
Procedure:
-- Attach the connector of the Vehicle Diagnostic Tester: VAS 6160 A to the diagnostic connection in the vehicle.
-- Turn on the Vehicle Diagnostic Tester.
-- Switch the ignition on.
-- Follow the screen menu to start the desired function.