Rear Lid Remote Release Button -E233-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front door trim panel. Refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .
-- Disconnect the connector -3-.
-- Release the clip -2- and remove the trim -1- with the switch from the door trim panel -arrow-.
-- Release the hooks in direction of -arrows- carefully with a small screwdriver.
-- Remove the switch -1- toward the rear from the trim -2-.