LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Cylinder Head, VALVETRAIN Servicing (2.9L & 3.0L)) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Camshaft Timing Chain, Removing And Installing >> Installing

Camshaft Timing Chain, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi S7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Position the camshaft timing chains on the camshafts. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .

-- Install the lower timing chain cover. Refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- If changes on the timing chain make place or components should be replaced, perform the corresponding adaptations in the Guided Functions "0001 - Engine electronics, functions". Use the Vehicle Diagnostic Tester .