LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Crankshaft, Cylinder Block Servicing (2.9L & 3.0L)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> Starter Generator Bracket, Removing And Installing >> Removing

Starter Generator Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi S7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the starter generator. Refer to GENERATOR, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the bracket -1-.

Fig 1: Starter Generator Bracket -1-
GWWA13-11294Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals