LEMON Manuals: Even more car manuals for everyone

Home >> Audi >> 2020 >> Q7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Crankshaft, Cylinder Block Servicing (2.9L & 3.0L)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> A/C Compressor Bracket, Removing And Installing, 2.9L Engine Without Electrical Compressor >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2022 Audi S7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Figure
Refer to OVERVIEW - CHARGE AIR SYSTEM
Refer to OVERVIEW - A/C COMPRESSOR .

scientia non olet · About LEMON Manuals