LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Crankshaft, Cylinder Block Servicing (2.9L & 3.0L)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> Ribbed Belt TENSIONER For A/C Compressor, Removing And Installing, 2.9L Engine >> Installing

Ribbed Belt TENSIONER For A/C Compressor, Removing And Installing, 2.9L Engine: Installing

WARNING: This page is about a different car, the 2022 Audi S7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

There are additional procedures depending on the model. Refer to RIBBED BELT TENSIONER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals