LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Crankshaft, Cylinder Block Servicing (2.9L & 3.0L)) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Sensor Wheel, Removing And Installing >> Removing

Sensor Wheel, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi S7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING .

CAUTION:

Do not place the sensor wheel near magnets (for example lamp base, speakers).

There is a risk of destroying the sensor wheel by magnetic force.

- Before installing the drive plate/flywheel or sensor wheel, check the function of the sensor wheel.

-- Remove the sensor wheel -arrow-.

Fig 1: Identifying Sensor Wheel
GWWA28-10118Courtesy of AUDI OF AMERICA, LLC