Overview - Emissions Control System, Vehicles With Catalytic Converter
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Turbocharger
- Overview. Refer to OVERVIEW - TURBOCHARGER .
- Heated Oxygen Sensor -G39-
- Overview. Refer to OVERVIEW - HEATED OXYGEN SENSOR .
- Seal
- Replace after removing
- Screw-Type Clamp
- 7 Nm
- Replace after removing
- Installation position. Refer to Fig 2.
- Catalytic Converter
- Removing and Installing. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING .
- Oxygen Sensor after Catalytic Converter -G130-
- Overview. Refer to OVERVIEW - HEATED OXYGEN SENSOR .
Installation Position of the Catalytic Converter Screw-Type Clamp
- Angle -α- = 90° ± 15°.