Fan Shroud, Removing And Installing, Version Q7 Without Radiator Shutter
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the radiator. Refer to RADIATOR, REMOVING AND INSTALLING .
-- Remove the fan shroud from the radiator. To do this, press the locking tabs in direction of -arrow A- on the left and right side. Lift the fan shroud upward in direction of -arrow B-.
Installing
Install in the reverse order of removal while noting the following:
- The guides -arrows- for the fan shroud -1- must be attached in the upper and lower recesses on the radiator -2-
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
Tightening Specifications
- Refer to OVERVIEW - RADIATOR/RADIATOR FAN