Right Coolant Pipe, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Remove the right subframe shield. Refer to SUBFRAME SHIELD, REMOVING AND INSTALLING .
-- Remove the right drive axle heat shield. Refer to DRIVE AXLE HEAT SHIELD, REMOVING AND INSTALLING .
-- Remove the right drive axle from the transmission. Refer to DRIVE AXLE, REMOVING AND INSTALLING .
-- Place the Shop Crane - Drip Tray: VAS6208 underneath.
-- Remove the bolt -2-.
-- Loosen the hose clamps -1 and 4- and remove the right coolant pipe -3-. (Shown with subframe removed.)