LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Cooling System 3.0L) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Left Rear Coolant Pipe, Removing And Installing >> Removing

Left Rear Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

Vehicles with High-Voltage System: 

-- Remove the High-Voltage Battery Coolant Pump -V590-. Refer to High-Voltage Battery Coolant Pump -V590-, REMOVING AND INSTALLING .

Continuation for All Vehicles: 

-- Remove the bolts -arrows-.

GWWA19-12589Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamp -1- and remove the coolant pipe -2-.

-- If necessary, free up the wiring harness.