Recirculation Pump 5 -V406-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Disconnect the connector -7-.
-- Place a cloth underneath to catch any escaping coolant.
-- Loosen the hose clamps -5 and 8-, then clamp off the coolant hoses -1 and 4- with the Hose Clamps - Up To 25mm: 3094 and then remove them.
-- Free up the coolant hoses -1 and 4-.
-- Remove the bolts -2-. (For clarity the coolant hose is shown removed.)
-- Remove the Recirculation Pump 5 -V406- -5- with the bracket -1-.
-- Remove the bolts -arrows- and remove the Recirculation Pump 5 -V406- -5- from he bracket -1-.