Right Rear Coolant Pipes On Longitudinal Member, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Place a cloth underneath to catch any escaping coolant.
-- Disconnect the coolant hoses from the corresponding coolant pipes -1 or 2- with the Hose Clamps - Up To 25 mm: 3094 .
-- Loosen the hose clamps -arrows- and remove the coolant hoses from the coolant pipe.
-- Remove the nuts -3- and remove the coolant pipe -1 or 2-.