Front Coolant Pipe 1, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the lock carrier cover. Refer to OVERVIEW - BUMPER COVER .
-- Release the left and right catches in direction of -arrows- and remove the retaining pin -1- for the radiator upward.
-- Carefully push the radiator module as far forward as possible and secure using suitable service equipment.
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Place a cloth underneath to catch any escaping coolant.
-- Remove the coolant hoses -1, 2, 8 and 10- to do so loosen the hose clamps -3, 5, 9 and 11-.
-- Remove the bolts -arrows- and remove the coolant pipe -4-.