Replacing Tool Head

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Select the appropriate tool head based on the antenna wire test. Refer to Checking the Antenna Wire .

-- Open the handle on the pliers all the way.

-- Release and remove both locking pins in direction of -arrows- from the handle.

Fig 1: Disengaging Crimping Tool Locking Pins

Courtesy of AUDI OF AMERICA, LLC

-- Attach the necessary tool head to the handle from the top in direction of -arrow-.

Fig 2: Identifying Insertion Of Crimping Tool Head

Courtesy of AUDI OF AMERICA, LLC

-- Insert the pins in direction of -arrows- into the handle in order to lock the tool head into place.

Fig 3: Engaging Crimping Tool Locking Pins

Courtesy of AUDI OF AMERICA, LLC