Engine Sound Generator Control Module -J943-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the luggage compartment floor. Refer to Luggage Compartment Trim Panels .

-- Disconnect the connector -6-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Remove the Engine Sound Generator Control Module -J943- -1- from the bracket -3-.

Bracket, Removing:

-- Loosen clips -4- and free up wiring harness.

-- Remove the nuts -2 and 5- and also remove the bracket -3-.