LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Seat Frames) >> 72 Seat Frames >> Rear Seats >> Seat Frame, Disassembling And Assembling >> Seat Adjustment Control Module, Removing And Installing, Third Row >> Removing

Seat Adjustment Control Module, Removing And Installing, Third Row: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
GWWA72-12166Courtesy of AUDI OF AMERICA, LLC

-- Switch off the ignition.

-- Remove the luggage compartment floor bracket. Refer to LUGGAGE COMPARTMENT CARPET BRACKET, REMOVING AND INSTALLING .

-- Remove the nuts -arrows-.

-- Disengage the bracket -1- with the control module and free up the wiring harness.

-- Open the tabs -arrows-.

GWWA72-12168Courtesy of AUDI OF AMERICA, LLC

-- Remove the control module -1- from the bracket -2-.

-- Release the connector safety catch and disconnect the connectors -3-.