Rear Seat Backrest Locking Mechanism Handle, Removing And Installing, Outer Second Row Seat: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Fold the seat forward.
-- Fix the : 3370 on the trim -1- for the rear seat backrest locking mechanism -2- as shown.
-- Remove the trim in the direction of the -arrow-.
-- Carefully lift up the fastener using a small screwdriver -A arrow-.
-- At the same time, remove the handle from the shaft -arrow B-.