Backrest Adjustment Locking Latch Motor, Removing And Installing, Third Row: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the third row seat. Refer to THIRD ROW SEAT, REMOVING AND INSTALLING .
-- If the backrest is folded in, connect the backrest adjustment motor to an external power source and fold the backrest upright. Refer to Wiring Diagram.
-- Remove the cover and cushion. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, THIRD ROW BACKREST .
-- Unclip the guide -1- from the backrest adjustment locking latch motor -arrow-.
-- Press the release and disconnect the connector -2-.
-- Remove the nuts -4-.
-- Remove the backrest adjustment locking latch motor -5- with the bracket -3- from the backrest frame.