Overview - Bench Seat/Single Seats, Seat Frame High, Outer Second Row
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Release Cable
- For seat folding release
- Removing and Installing. Refer to RELEASE CABLE FOR SEAT FOLDING RELEASE, REMOVING AND INSTALLING, SEAT HIGH, OUTER SECOND ROW .
- Lock Washer
- Front Mount
- For seat frame
- Spiral Spring
- Locking Mechanism
- For seat frame
- Pin
- Lock Washer
- Pin
- Front Mount
- For seat frame
- Seat/Backrest Frame
- Rear Mount
- For seat frame
- Quantity: 2
- Bolt
- Self-locking
- Replace after removing.
- 25 Nm
- Bolt
- Self-locking
- Replace after removing.
- Seat Rail
- Nut
- 2.9 Nm
- Spiral Spring
- For release lever
- Lever
- For seat folding release
- Mount
- For the seat rail
- Nut
- Self-locking
- Replace after removing.
- 25 Nm
- Gas-Filled Strut
- For seat folding release
- Press onto ball pin and engage.
- Removing and Installing. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING, SEAT HIGH, OUTER SECOND ROW .
- Ball Pin
- Welded on to the seat frame
- Rear Seat Backrest Contact Switch
- Left Rear Seat Backrest Contact Switch -F315-, Right Rear Seat Backrest Contact Switch -F316-
- Removing and Installing. Refer to REAR SEAT BACKREST CONTACT SWITCH, REMOVING AND INSTALLING, SEAT HIGH, OUTER SECOND ROW .
- Bolt
- 2.9 Nm