Seat Height Adjustment Handle, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Move the front seat all the way forward and up.

-- Remove the handle for the seat height adjustment to the side from the seat -arrow- using the :3409 .

TIP:

Courtesy of AUDI OF AMERICA, LLC

If the handle cannot be removed, proceed as follows:

-- Slide the : 3409 between the handle -1- and the seat side trim -2-.

-- To protect the seat side trim, place a cloth -3- between the trim panel and :T10055 before positioning the tool.

-- Position the :T10055 as shown on the lever and remove the lever from the seat -arrow-.

-- To remove the adapter, remove the seat height adjuster -1-, and the seat frame trim panel on the side sill side. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING .

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Remove the adapter for the seat height adjuster -1-.