Front Seat Switch/Switch Module, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the seat side trim on the side sill side. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING .
Equipped on some models:
-- Carefully unclip the rocker -1- from the switch module using the :3409 .
Driver Seat Lumbar Support Adjustment Switch - E176- / Front Passenger Seat Lumbar Support Adjustment Switch -E177-
-- Remove the bolts -1- and switch -2-.
Driver Seat Switch Module -E663- / Front Passenger Seat Switch Module - E664-
-- Remove the bolts -arrows- and remove the switch module -1-.