Overview - Pneumatic System, Module Carrier/Lumbar Support/Seat Bolster Inflation Adjuster
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Seat Frame
- Seat Bolster Inflation Adjuster
- Quantity: 2
- Removing and Installing. Refer to SEAT BOLSTER INFLATION ADJUSTER AIR CUSHION, REMOVING AND INSTALLING .
- Expanding Clip
- Bolt
- 2.5 Nm
- Module Carrier
- with lumbar support air cushions
- Removing and Installing. Refer to VALVE BLOCK 1 IN DRIVER SEAT -N475- / VALVE BLOCK 1 IN FRONT PASSENGER SEAT -N477- AND AIR CUSHIONS, REMOVING AND INSTALLING .
- Backrest Bolster Inflation Adjuster
- Quantity: 2
- Available only with -item 5-
- Removing and Installing. Refer to VALVE BLOCK 1 IN DRIVER SEAT -N475- / VALVE BLOCK 1 IN FRONT PASSENGER SEAT -N477- AND AIR CUSHIONS, REMOVING AND INSTALLING .
- Bolt
- 2.5 Nm
- Valve Block 1 in Driver Seat -N475-
- Front passenger side: Valve Block 1 in Front Passenger Seat -N477-
- Available only with -item 5-
- Removing and Installing. Refer to VALVE BLOCK 1 IN DRIVER SEAT -N475- / VALVE BLOCK 1 IN FRONT PASSENGER SEAT -N477- AND AIR CUSHIONS, REMOVING AND INSTALLING .
- Rubber Buffer
- Quantity: 4
- Rubber Bracket
- for blower fan
- Quantity: 4
- Driver Seat Backrest Blower Fan -V388-
- Front passenger side: Front Passenger Seat Backrest Blower Fan -V389-
- Removing and Installing. Refer to BACKREST FAN, REMOVING AND INSTALLING .
- Bolt
- 6.5 Nm