LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> Q7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Seat Frames) >> 72 Seat Frames >> Front Seat Pneumatic System >> Massage Mat, Removing And Installing >> Removing

Massage Mat, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Separate the cover and cushion. Refer to BACKREST COVER AND CUSHION, SEPARATING .

Super Sport Seat:

GWWA72-12764Courtesy of AUDI OF AMERICA, LLC

-- If necessary, loosen the bottom of the heating element -1- from the adhesive in the area of the center cushion.

-- Fold back or lift up the foam pieces -2, 3, and 4- with heating element -arrows-. Loosen from the adhesive if necessary.

-- Remove the clips -arrows-.

GWWA72-12765Courtesy of AUDI OF AMERICA, LLC

-- Thread the pneumatic lines and pneumatic connector at the top and bottom of the cushion.

-- Remove the massage mat -1-.

Comfort Seat:

GWWA72-11908Courtesy of AUDI OF AMERICA, LLC

-- Fold back or lift up the foam sheets -1 and 5-. Loosen them from the bonding if necessary.

-- Remove the clips -3, 4 and 6-.

-- Remove the massage mat -2-.